.032 X 48” X 10' STUCCO EMBOSSED NON CLAD FLAT WITH POLYSURLYN MOISTURE BARRIER Aluminum Rolls and Sheets
Distribution International
1-800-231-3454

601 Jefferson St.
Suite #600
Houston, TX 77002

METAL STUCCO EMBOSSED SHEETS AND ROLLS
Send Print

.032 X 48" X 10' STUCCO EMBOSSED NON CLAD FLAT WITH POLYSURLYN MOISTURE BARRIER

Aluminum Rolls and Sheets

  • Manufacturer: Johns Manville
  • Brand: JM (Formerly Pabco/Childers)
  • DI Part #: ALSH3210SEFNW
  • Manufacturer Part #: SA324EWPX10

JM (Formerly Pabco/Childers) Flat Aluminum Sheet, Item Thickness: .032 in, Material: Aluminum, Finish: Stucco Embossed, Moisture Barrier: Polysurlyn Moisture Barrier, Length: 10 ft, Width: 48 in, Application: For Use in All of the Following Insulation System Applications Standard Outdoor Use on All Pipe, Vertical Tank Insulation Systems Up to 8 ft Outer Diameter and All Horizontal Tanks, Indoor Insulation System Applications Up to 8 ft Outer Diameter Where Increased Damage Resistance is Desired, Smoke Developed Index: 5, Flame Spread Index: 0

Application   : For Use in All of the Following Insulation System Applications Standard Outdoor Use on All Pipe, Vertical Tank Insulation Systems Up to 8 ft Outer Diameter and All Horizontal Tanks, Indoor Insulation System Applications Up to 8 ft Outer Diameter Where Increased Damage Resistance is Desired

Finish   : Stucco Embossed

Flame Spread Index   : 0

Item Name   : Aluminum Sheet

Item Thickness   : .032 in

Length   : 10 ft

Material   : Aluminum

Moisture Barrier   : Polysurlyn Moisture Barrier

Smoke Developed Index   : 5

Type/Style   : Flat

Width   : 48 in

ITW Pabco/Childers aluminum jacketing is the premier protective outer surface for mechanical insulation systems including pipe, vessels, and equipment. It protects the insulation and underlying pipe/vessel from physical damage, UV exposure, corrosive atmospheres, and water. ITW aluminum jacketing (also called cladding) is available in smooth, stucco embossed, and 3/16 corrugated (cross-crimped) finishes. For larger surfaces, box-rib and deep corrugated sheets are also available. ITW aluminum Jacketing has a bare outer surface and comes standard with a 3 mil thick polyfilm moisture barrier heat-laminated to the interior surface to help prevent corrosion of the jacketing and the underlying metal pipe, vessel, or equipment.

Standards/Certifications: ASTM B209|ASTM C1371|ASTM C1729

  • pdfTechnical Data Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/JM_IND_AluminumRoll_DS.pdf