AEROSEAL LVOC BLACK CONTACT ADHESIVE LOW VOC PINT BRUSH TOP (12)

Aerocel Aeroseal LVOC™ Elastomeric Adhesive, Size: 1 pt, Color: Black, Density: 1.04 g/cc, Temperature Rating: -297 to 220 deg F, Container Type: Brush Top Can, Form: Liquid, Odor: Pleasant to Pungent Ketone, Composition: 45 to 55% Acetone, 25 to 31% Methyl Acetate, 8 to 10% Synthetic Rubber, 6 to 8% Phenolic Resin, 1 to 3% Phenol, 1 to 2% Copolymer of Vinyl Acetate + Vinyl Chloride + Dicarbonic Acid, <0.8% Methanol, 0.7 to 0.8% Bisphenol A Epichlorohydrin Polymer, 0.2 to 0.5% o-Cresol, 0.1 to 0.2% Polymerized 1,2-Dihydro-2,2,4-Trimethylquinoline, Carbon Black, Cure Time: 24 to 36 hr, Specific Gravity: 0.863, Flash Point: 9 to 30 deg F, Boiling Point: 131 to 136 deg F, Melting Point: -106 to -97 deg F, Vapor Pressure: 241 hPa, Flammability Rating: 1.3% Lower, 12% Upper, Viscosity: 800 cPs, Shelf Life: 1 year, Coverage: 200 sq-ft/gal, Dry Time: 5 to 10 min

Boiling Point   : 131 to 136 deg F

Color   : Black

Composition   : 45 to 55% Acetone, 25 to 31% Methyl Acetate, 8 to 10% Synthetic Rubber, 6 to 8% Phenolic Resin, 1 to 3% Phenol, 1 to 2% Copolymer of Vinyl Acetate + Vinyl Chloride + Dicarbonic Acid, <0.8% Methanol, 0.7 to 0.8% Bisphenol A Epichlorohydrin Polymer, 0.2 to 0.5% o-Cresol, 0.1 to 0.2% Polymerized 1,2-Dihydro-2,2,4-Trimethylquinoline, Carbon Black

Container Type   : Brush Top Can

Coverage   : 200 sq-ft/gal

Cure Time   : 24 to 36 hr

Density   : 1.04 g/cc

Dry Time   : 5 to 10 min

Flammability Rating   : 1.3% Lower, 12% Upper

Flash Point   : 9 to 30 deg F

Form   : Liquid

Item Name   : Elastomeric Adhesive

Melting Point   : -106 to -97 deg F

Odor   : Pleasant to Pungent Ketone

Shelf Life   : 1 year

Size   : 1 pt

Specific Gravity   : 0.863

Sub Brand   : Aeroseal LVOC

Temperature Rating   : -297 to 220 deg F

Vapor Pressure   : 241 hPa

Viscosity   : 800 cPs

Aerocel Aeroseal LVOC adhesive is a synthetic rubber base contact adhesive formulated for bonding Aerocel insulating materials firmly together as well as bonding Aerocel insulation to other substrates. Aeroseal LVOC adhesive is specially formulated to meet the VOC content and emissions requirements of LEED for special purpose contact adhesives. Bonding of non-rigid substrates that undergo dimensional changes in use is excellent with Aerocel Aeroseal LVOC adhesive. Aeroseal LVOC creates strong seams and butt joints that will operate at temperatures up to 257 deg F. Aeroseal LVOC may also be used for adhering sheet insulation to flat and curved surfaces that will operate at temperatures to 200 deg F. Aeroseal LVOC adhesive has a high moisture and water vapor resistance and weathering resistance to prevent moisture from penetrating joints, forming a permanent bond to the applied surface for long lasting service. • Maximum service temperatures: -20 deg F to 257 deg F (piping), 200 deg F (sheets/rolls)• tack time = 3-5 minutes (dry to touch), dry time = immediate• Aeroseal LVOC seams can be sealed with Protape or coated with Aerocoat immediately• coverage = 200 ft2/gallon• shelf life = 1 year• VOC content = 167 g/L• Colors - black, Sizes = pint (brush-top), gallonStandards/Certifications: CDPH Standard Method v1.2 (VOC emissions), SCAQMD Rule 1168 (VOC content).

• SDS https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/SDS_Aerocel_Aeroseal LVOC Black_010120.pdf
• Technical Data Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/Aeroflex_Aerocel_Aeroseal LVOC Black_Data Sheet_111521.pdf