1-7/8” ID (1-1/2” IPS) X 1-1/2” (36) AEROCEL EPDM AC SSPT PIPE COVERING - Elastomeric & Polyethylene Insulation

1-7/8" ID (1-1/2" IPS) X 1-1/2" (36) AEROCEL EPDM AC SSPT PIPE COVERING

Elastomeric Pipe Covering

  • Manufacturer: Aeroflex USA
  • Brand: Aerocel
  • DI Part #: RUPC01815SE
  • Manufacturer Part #: 806-AC178112SSPT

Aerocel Stay-Seal® Protape® Elastomeric Pipe Cover, Iron Pipe Size: 1-1/2 in IPS, Inside Diameter: 1-7/8 in, Insulation Thickness: 1-1/2 in, Material: Elastomeric, Color: Black, Facing Type: Self Seal Lap, Length: 6 ft, Application: Used to Retard Heat Gain or Loss and to Control Condensation Formation on Cold Water Plumbing, Chilled Water and Refrigeration Lines, Special Features: Thermal, Temperature Rating: -297 to 220 deg F, Water Vapor Permeability: 0.03 perm-in, Water Vapor Sorption: 0.2 %, Flame Spread Index: <25, Smoke Developed Index: <50, Thermal Conductivity: 0.22 to 0.25 Btu-in/hr-sq-ft-deg F, For Use With: 1-1/2 in Pipe

Application   : Used to Retard Heat Gain or Loss and to Control Condensation Formation on Cold Water Plumbing, Chilled Water and Refrigeration Lines

Color   : Black

Facing Type   : Self Seal Lap

Flame Spread Index   : <25

For Use With   : 1-1/2 in Pipe

Inside Diameter   : 1-7/8 in

Insulation Thickness   : 1-1/2 in

Iron Pipe Size   : 1-1/2 in IPS

Item Name   : Elastomeric Pipe Cover

Length   : 6 ft

Material   : Elastomeric

Smoke Developed Index   : <50

Special Features   : Thermal

Sub Brand   : AC SSPT

Temperature Rating   : -297 to 220 deg F

Thermal Conductivity   : 0.22 to 0.25 Btu-in/hr-sq-ft-deg F

Water Vapor Permeability   : 0.03 perm-in

Water Vapor Sorption   : 0.2 %

Aerocel Stay-Seal with Protape (SSPT) factory pre-slit tube insulation is a flexible, closed-cell and lightweight EPDM-based elastomeric foam rubber designed for insulating HVAC, refrigeration and plumbing piping. 3/8, 1/2, 3/4, 1, 1-1/4, 1-1/2 and 2 in wall in popular ID sizes from 1/4 in ID up to 16" IPS ID. Aerocel EPDM is chemically non-polar and hydrophobic, which means that it does not induce or react with moisture. EPDM maintains greater UV resistance than NBR/PVC rubber, is naturally microbial-resistant, contains less than 1% PVC content, and is non-corrosive on stainless steel. Passes ASTM E84 25/50 through 2" thick, GREENGUARD Gold Certified for low chemical emissions, Environmental Product Declaration (EPD) Type III product-specific, Health Product Declaration (HPD) third-party verified, Standards/Certifications: ASTM C177|ASTM C209|ASTM C411|ASTM C518|ASTM C534|ASTM C692|ASTM D1056|ASTM D1171|ASTM E84|ASTM E96|ASTM G7|ASTM G90|ASTM 635|Buy American|DIN 1988|EPA TSCA Section 6h|MIL l528OJ|New York City MEA 171-04M|NFPA 90A|NFPA 90B | REACH | RoHS |UL 181 Section 12 Mold Growth/Humidity|UL 181 Section 17 Air Erosion|UL94 5V-0 Flammability Rating|UL 723
  • pdf SDS https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/SDS_Aerocel_SSPT_010120.pdf
  • pdf Technical Data Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/Aeroflex_Aerocel_SSPT_Data Sheet_111521.pdf