Viscotaq Viscowrap-ST Elastomeric Tape, Material: Elastomeric, Length: 33 ft, Width: 4 in, Temperature Rating: -43 to 160 deg F, Adhesion Strength: 0.06 kN, Dielectric Strength: >17.5 kV/mm, Tensile Strength: 222 N-cm
Adhesion Strength : 0.06 kN
Dielectric Strength : >17.5 kV/mm
Item Name : Elastomeric Tape
Length : 33 ft
Material : Elastomeric
Sub Brand : Viscowrap-ST
Temperature Rating : -43 to 160 deg F
Tensile Strength : 222 N-cm
Width : 4 in
VISCOTAQ VISCOWRAP-ST is an amorphous viscous elastic solid polyolefin coating for corrosion prevention of underground and above ground substrates. VISCOWRAP-ST is part of a 2-layer system that consists of a corrosion protective inner wrap (VISCOWRAP) and mechanical protective outer wrap that can be a PE, PVC or PU composite outer wrap.
- Melting point 152.8 deg C
- Glass transition temperature -42.92 deg C
- CD value 0 to 3 mm (ASTM G8) at 23 deg C
- Self-healing in case of small damages
- Impervious to moisture and gases
- Adhesion to the substrate without primer
- Remaining flexibility over decades
- Easy in use, can be cut and paste
- Permanent wetting characteristics
- Eliminates microbiological induced corrosion
- No curing time
- Extreme high chemical resistance
- No sensitivity to salts and osmosis
- Cohesive fracture
- 100% inert formulation no reactive groups and no deterioration in the course of time
Standards/Certifications: ASTM D1000|ASTM D149-09|ASTM D257-07|ASTM D638|ASTM E1356-03|ASTM E96|ASTM 96M-10|ASTM G8-96|ASTM G9-87|ASTM G9-98|CSA Z245-20-06 Section 12.11|CSA Z245-20-06 Section 12.14|DIN 53479|ISO 62|ISO 3219|ISO 21809
Specification Sheet
