1/2" ID X 3/4" (204) INNOFOAM SELF-SEAL PIPE COVERING

Aerocel Aeroguard® Elastomeric Pipe Cover, Iron Pipe Size: 1/4 in IPS, Inside Diameter: 1/2 in, Insulation Thickness: 3/4 in, Material: Polyethylene, Facing Type: Self Seal Lap, Density: 1.5 pcf, Application: Used to Retard Heat Gain or Loss and to Control Condensation Formation on Cold Water Plumbing and HVAC Refrigeration Lines, Temperature Rating: -297 to 220 deg F, Water Vapor Permeability: <0.05 perm-in, Water Vapor Sorption: <0.2 %, Flame Spread Index: 25, Smoke Developed Index: 50, Thermal Conductivity: 0.23 Btu-in/hr-sq-ft-deg F

Application   : Used to Retard Heat Gain or Loss and to Control Condensation Formation on Cold Water Plumbing and HVAC Refrigeration Lines

Density   : 1.5 pcf

Facing Type   : Self Seal Lap

Flame Spread Index   : 25

Inside Diameter   : 1/2 in

Insulation Thickness   : 3/4 in

Iron Pipe Size   : 1/4 in IPS

Item Name   : Polyethylene Pipe Cover

Material   : Polyethylene

Smoke Developed Index   : 50

Sub Brand   : InnoFoam

Temperature Rating   : -297 to 220 deg F

Thermal Conductivity   : 0.23 Btu-in/hr-sq-ft-deg F

Water Vapor Permeability   : <0.05 perm-in

Water Vapor Sorption   : <0.2 %

InnoFoam factory pre-slit self-seal polyethylene tubes effectively insulate hot/cold water piping while providing freeze protection. Low-VOC formula. Available in ID's ranging from 1/4" to 4-1/2" IPS and thicknesses from 3/8" to 1", passes ASTM E84 through 1-1/2". Color - Black. Standards/Certifications: ASTM C177|ASTM C1427|ASTM C209|ASTM C411|ASTM C518|ASTM D1622|ASTM E84 25/50|ASTM E96

• SDS https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/SDS_PTI_InnoFoam_101520.pdf
• Technical Data Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/Aeroflex_InnoFoam_Data Sheet_111521.pdf