Distribution International supplies Fiberglass Board like our 2” X 24” X 48” OWENS CORNING TIW II FIBERGLASS BOARD (128) Insulation.

2" X 24" X 48" OWENS CORNING TIW II FIBERGLASS BOARD (128)

Fiberglass Board

  • Manufacturer: Owens Corning
  • Brand: Owens Corning
  • DI Part #: FIBDT22024O
  • Manufacturer Part #: 675082

Owens Corning Fiberglas™ Fiberglass Board, Insulation Thickness: 2 in, Material: Fiberglass, Length: 48 in, Width: 24 in, Density: 2.5 pcf, Application: For Use in Metal Mesh Blankets and for Use on Boilers, Vessels and Many Other Types of Industrial Equipment Operating at Temperatures Upto 1000 deg F at Maximum Recommended Thickness, Also be Used in Panel Systems for Precipitators, Ducts and Breechings, Special Features: TIW 2, Temperature Rating: 1000 deg F, Water Vapor Sorption: <5 %, Flame Spread Index: 25, Smoke Developed Index: 50, Thermal Conductivity: 0.26 to 0.64 Btu-in/hr-sq-ft-deg F

Application   : For Use in Metal Mesh Blankets and for Use on Boilers, Vessels and Many Other Types of Industrial Equipment Operating at Temperatures Upto 1000 deg F at Maximum Recommended Thickness, Also be Used in Panel Systems for Precipitators, Ducts and Breechings

Density   : 2.5 pcf

Flame Spread Index   : 25

Insulation Thickness   : 2 in

Item Name   : Fiberglass Board

Length   : 48 in

Material   : Fiberglass

Smoke Developed Index   : 50

Special Features   : TIW 2

Sub Brand   : Fiberglas

Temperature Rating   : 1000 deg F

Thermal Conductivity   : 0.26 to 0.64 Btu-in/hr-sq-ft-deg F

Water Vapor Sorption   : <5 %

Width   : 24 in

  • Excellent thermal performance contributes to lower fuel costs due to reduced heat loss
  • Easy-to-handle and install
  • The insulation is easily impaled over welded studs or pins, or may be held in place with wire ties, metal lath or lagging
  • There is no tendency for pin hole elongation under vibration situations, a frequent source of heat leaks in heavy products
  • Large batts or blankets cover greater areas quickly, eliminating tedious block by block hand layup and drilling for studs in hard insulations
  • Can be used in direct contact with steel, copper and aluminum without corrosive effects

Standards/Certifications: ASTM C553|ASTM C612|ASTM C795|CAN/CGSB 51.11 Type 1 Class 4|MIL-DTL-32585|MIL-I-22023D|Nuclear Regulatory Commission Guide 1.36|USCG 164.109

  • pdf Catalog/Catalog Cut Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/FIBD31024O_CAT.pdf
  • pdf SDS https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/FIBDT22024O_SDS.pdf
  • pdf Specification Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/FIBDT22024O_SS.pdf