2” X 48” X 75' 3/4# PSK KNAUF DUCT WRAP Fiberglass Insulation

2" X 48" X 75' 3/4# PSK KNAUF DUCT WRAP

Fiberglass Duct Wrap

  • Manufacturer: Knauf Insulation
  • Brand: Knauf Insulation
  • DI Part #: FIDW752048PK
  • Manufacturer Part #: 502880

Knauf Insulation Friendly Feel® Fiberglass Duct Wrap, Insulation Thickness: 2 in, Material: Fiberglass, Color: White, Facing Type: PSK, Length: 75 ft, Width: 48 in, Density: 0.75 pcf, R-Value: 5.6, Application: For External Insulation on Commercial or Residential Heating or Air Conditioning Ducts, Temperature Rating: 1000 deg F, Water Vapor Permeability: 0.02 perm-in, Water Vapor Sorption: <5 %, Thermal Conductivity: 0.28 to 0.43 Btu-in/hr-sq-ft-deg F, Flame Spread Index: 25, Smoke Developed Index: 50

Application   : For External Insulation on Commercial or Residential Heating or Air Conditioning Ducts

Color   : White

Density   : 0.75 pcf

Facing Type   : PSK

Flame Spread Index   : 25

Insulation Thickness   : 2 in

Item Name   : Fiberglass Duct Wrap

Length   : 75 ft

Material   : Fiberglass

R-Value   : 5.6

Smoke Developed Index   : 50

Sub Brand   : Friendly Feel

Temperature Rating   : 1000 deg F

Thermal Conductivity   : 0.28 to 0.43 Btu-in/hr-sq-ft-deg F

Water Vapor Permeability   : 0.02 perm-in

Water Vapor Sorption   : <5 %

Width   : 48 in

Knauf Insulation Friendly Feel duct wrap with Ecose technology is a thermal and acoustical insulation blanket made from highly resilient, inorganic glass mineral wool bonded by Ecose technology. It is available unfaced, with a foil-scrim-kraft (FSK) jacket and with a white metalized polypropylenescrim-kraft (PSK) jacket. Vapor retarders provide a 2 in staple flange on one edge, and the factoryapplied facing assures uniform quality.

  • Flexible
  • Lightweight
  • Excellent acoustical properties
  • Tough and resilient
  • Energy conservation which lowers operating costs
  • System efficiency increases energy usage/costs decrease
  • Conforms easily to flat or irregular surfaces
  • Rolls allow for faster installation, lower labor costs
  • Low K factor significantly reduces heat gain or loss when applied with proper compression
  • Reduces sound transmission through the duct wall
  • Assured condensation control when installed at proper thickness using FSK or PSK facings, proper installation and sealed joints, seams and penetrations
  • Resists damage in shipment and during and after installation

Standards/Certifications: ASTM C1136 Type II|ASTM C1139 Unfaced Type I II|ASTM C1290|ASTM C553 Type I II III|CAN/ULC S102-M88|CAN/CGSB 51.11.92|cULus Listed|EUCEB Certified|Greenguard Gold Certified|NFPA 90A|NFPA 90B|US Federal Specification HH-I-558C Form B Type I Class 7

  • pdfSpecification Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/FIDW752048FK_SS.pdf