1/2" (7/8") X 1/2" (282) OWENS CORNING SSL II WITH ASJ MAX FIBERGLASS PIPE COVERING

Owens Corning Fiberglas™ Fiberglass Pipe Cover, Iron Pipe Size: 1/2 in IPS, Copper Tubing Size: 7/8 in CTS, Insulation Thickness: 1/2 in, Material: Fiberglass, Color: White, Facing Type: SSL II WITH ASJ MAX, Length: 3 ft, Density: 3.5 to 5.5 pcf, Application: For Use in Insulate Iron, Copper, PVC and Other Polymer Pipes with Operating Temperatures Between 0 to 1000 deg F in Commercial/Industrial and Institutional Buildings, Temperature Rating: 0 to 1000 deg F, Insulation Diameter: 1.88 in, Water Vapor Permeability: 0.01 perm-in, Water Vapor Sorption: <5 %, Flame Spread Index: 25, Smoke Developed Index: 50, Burst Strength: 100 psi, Thermal Conductivity: 0.22 to 0.54 Btu-in/hr-sq-ft-deg F

Application   : For Use in Insulate Iron, Copper, PVC and Other Polymer Pipes with Operating Temperatures Between 0 to 1000 deg F in Commercial/Industrial and Institutional Buildings

Burst Strength   : 100 psi

Color   : White

Copper Tubing Size   : 7/8 in CTS

Density   : 3.5 to 5.5 pcf

Facing Type   : SSL II WITH ASJ MAX

Flame Spread Index   : 25

Insulation Diameter   : 1.88 in

Insulation Thickness   : 1/2 in

Iron Pipe Size   : 1/2 in IPS

Item Name   : Fiberglass Pipe Cover

Length   : 3 ft

Material   : Fiberglass

Smoke Developed Index   : 50

Sub Brand   : Fiberglas

Temperature Rating   : 0 to 1000 deg F

Thermal Conductivity   : 0.22 to 0.54 Btu-in/hr-sq-ft-deg F

Water Vapor Permeability   : 0.01 perm-in

Water Vapor Sorption   : <5 %

Owens Corning SSL II with ASJ Max Fiberglas pipe insulation is molded of heavy density resin bonded inorganic glass fibers that come in 1-piece, 36 in long, hinged sections. The insulation is tailored to fit for copper and iron pipe applications.

• ASJ Max is an all service jacket with a polymer film exterior surface that is smooth, durable, cleanable, wrinkle resistant, resists water staining and does not support mold or mildew growth
• ASJ Max can resist short durations of water exposure that may occur during construction
• SSL II positive closure system is an advanced double adhesion that fastens and installs with no need for staples or mastic
• Insulation is tailored to fit with FlexCore technology to compress over copper and some small bore iron pipes and fittings, saving time by eliminating the need to fillet and RigidCore technology for fast and easy fabrication on larger pipes
• The product has a maximum operating temperature of 1000 deg F (with heat up schedule)
• The product does not contain polybromodiphenyl ethers (PBDE) (penta, octa, or deca-brominated diphenyl)

Standards/Certifications: ASTM C1136|ASTM C547 Type I Grade A and Type IV Grade B|ASTM C585|ASTM C795|Greenguard Gold Certified|MIL-PRF-22344E|MIL-DTL-32585|MIL-DTL-24244D|NFPA 90A|NFPA 90B|UL Listed

• Installation Instructions https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/FIPC00505AO_II.pdf
• SDS https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/FIPC00505AO_SDS.pdf
• Specification Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/FIPC00505AO_SS.pdf