Matomo image

1-1/2" X 18" X 24" FOAMGLAS BLOCK OWENS CORNING (48)

Foamglas Block

  • Manufacturer: Owens Corning
  • Brand: Foamglas
  • DI Part #: FGBKPP15F
  • Manufacturer Part #: 882565

ONE™ Foamglas Block, Insulation Thickness: 1-1/2 in, Material: Foamglass, Length: 24 in, Width: 18 in, Density: 7.18 pcf, Application: For Cryogenic Systems, Low Temperature Pipe, Equipment, Tanks and Vessels, Medium and High Temperature Pipes and Equipment, Hot Oil and Hot Asphalt Storage Tanks, Heat Transfer Fluid Systems, Hydrocarbon Processing Systems, Chemical Processing Systems, Steam and Chilled Water Piping, Commercial Piping and Ductwork, Direct Burial/ Underground, Temperature Rating: 121 to 800 deg F, Flame Spread Index: 0, Smoke Developed Index: 0, Compressive Strength: 60 psi, Flexural Strength: 41 psi, Thermal Conductivity: 0.14 to 0.54 Btu-in/hr-sq-ft-deg F, Water Vapor Sorption: <0.2 %

Application   : For Cryogenic Systems, Low Temperature Pipe, Equipment, Tanks and Vessels, Medium and High Temperature Pipes and Equipment, Hot Oil and Hot Asphalt Storage Tanks, Heat Transfer Fluid Systems, Hydrocarbon Processing Systems, Chemical Processing Systems, Steam and Chilled Water Piping, Commercial Piping and Ductwork, Direct Burial/ Underground

Compressive Strength   : 60 psi

Density   : 7.18 pcf

Flame Spread Index   : 0

Flexural Strength   : 41 psi

Insulation Thickness   : 1-1/2 in

Item Name   : Foamglas Block

Length   : 24 in

Material   : Foamglass

Smoke Developed Index   : 0

Sub Brand   : ONE

Temperature Rating   : 121 to 800 deg F

Thermal Conductivity   : 0.14 to 0.54 Btu-in/hr-sq-ft-deg F

Water Vapor Sorption   : <0.2 %

Width   : 18 in

Foamglas One insulation is a lightweight, rigid material composed of millions of completely sealed glass cells. It is manufactured by Owens Corning in a block form and then fabricated into a wide range of shapes and sizes to satisfy industrial and commercial insulation requirements.

  • Constant insulating efficiency
  • Non-combustible
  • Non-absorbent
  • Impermeable to water and water vapor
  • Corrosion/chemical resistant
  • Long term dimensional stability
  • Vermin resistance
  • High compressive strength
  • Ecologically friendly, sustainable
  • Do not laminate to pitch, do not laminate with hydro-cal

Standards/Certifications: ASTM C1617|ASTM C165|ASTM C203|ASTM C240|ASTM C303|ASTM C552|ASTM C623|ASTM C692|ASTM C795|ASTM C871|ASTM E84|Nuclear Regulatory Commission Guide 1.36|UL R2844|UL 723

  • pdfCatalog/Catalog Cut Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/FIPC00505AO_CAT.pdf
  • pdfSDS https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/FGBKHB25F_SDS.pdf
  • pdfSpecification Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/FGBKHB25F_SS.pdf