FOSTER 85-50 SARAN ADHESIVE 5 GALLONS - Insulation Accessories

FOSTER 85-50 SARAN ADHESIVE 5 GALLONS

Adhesives

  • Manufacturer: H.B. Fuller
  • Brand: Foster
  • DI Part #: MAST85505F
  • Manufacturer Part #: MAST85505F

Foster 85-50 Series Adhesive, Size: 5 gal, Color: White, Special Features: Pressure Sensitive, Temperature Rating: -40 to 160 deg F, Container Type: Pail, Form: Liquid, Odor: Sweet, Composition: 50 to 70% Styrene/Acrylic Acid/2-Ethylhexylacrylate Polymer, 1 to 5% Polyethylene Glycol Octyl Phenoxy, Polyethylene Glycol Octyl Phenyl Ether, Specific Gravity: 1.03, Boiling Point: 212 deg F, Viscosity: 1000 to 2000 cPs, Shelf Life: 6 months, Coverage: 200 to 800 sq-ft/gal, Application Method: Brush, Spray, Roller

Application Method   : Brush, Spray, Roller

Boiling Point   : 212 deg F

Color   : White

Composition   : 50 to 70% Styrene/Acrylic Acid/2-Ethylhexylacrylate Polymer, 1 to 5% Polyethylene Glycol Octyl Phenoxy, Polyethylene Glycol Octyl Phenyl Ether

Container Type   : Pail

Coverage   : 200 to 800 sq-ft/gal

Form   : Liquid

Item Name   : Adhesive

Odor   : Sweet

Series/Model   : 85-50

Shelf Life   : 6 months

Size   : 5 gal

Special Features   : Pressure Sensitive

Specific Gravity   : 1.03

Temperature Rating   : -40 to 160 deg F

Viscosity   : 1000 to 2000 cPs

Pressure sensitive adhesive is a fast tacking waterbase pressure sensitive adhesive used to adhere a wide variety of insulation materials to metal or other construction surfaces where immediate adhesion and high initial adhesive strength are required. It can be used either as a one-way wet or dry bond, or as a two way contact cement. It is compatible with polystyrene foam insulation. Pressure sensitive adhesive has good initial wet grab, and develops a permanent aggressive tack on drying. It is well suited for use as a contact adhesive when bonding two impermeable surfaces. Pressure sensitive adhesive can be easily sprayed with either air assisted or low pressure airless spraying equipment without cobwebbing. Pressure sensitive adhesive meets ASTM C916, Type II requirements. Pressure sensitive adhesive can also be used for adhering difficult substrates like polyethylene film, phenolic, polyolefin, PVC or elastomeric foam.

Standards/Certifications: ASTM E84|LEED Certified|OSHA 29 CFR 1910.134

  • pdf SDS https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/MAST85505F_SDS.pdf
  • pdf Specification Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/MAST85505F_SS.pdf