THERMON T-85 HEAT TRACE CEMENT 1 GALLON

THERMON Heat Transfer Cement, Size: 1 gal, Color: Black, Application: For Heat Tracing, Moist or Corrosive Environments, Special Features: High-Temperature, Form: Liquid, Composition: 30 to 60% Bisphenol A-Epichlorohydrin Polymer, 1 to 5% Boron Trifluoride Complex, Flash Point: 251 deg C, Boiling Point: >260 deg F, Vapor Pressure: 0.03 mbar

Application   : For Heat Tracing, Moist or Corrosive Environments

Boiling Point   : >260 deg F

Color   : Black

Composition   : 30 to 60% Bisphenol A-Epichlorohydrin Polymer, 1 to 5% Boron Trifluoride Complex

Flash Point   : 251 deg C

Form   : Liquid

Item Name   : Heat Transfer Cement

Size   : 1 gal

Special Features   : High-Temperature

Vapor Pressure   : 0.03 mbar

T-85 is a low to medium temperature heat transfer compound for use in moist and corrosive environments. Thermon's heat transfer compounds provide an efficient thermal bond between the tracer and the process equipment. By eliminating the air voids that would ordinarily exist, heat is directed into the surface being heated through conduction rather than convection and radiation. A single tracer utilizing Thermon's heat transfer compound has the equivalent performance of three to five convection (bare) tracers. T-85 is typically utilized around valves and equipment where maximum exposure temperatures will not exceed 190 deg C.

• Non-soluble in water - no special curing required
• Epoxy resin base creates strong mechanical bond
• Cartridges allow easy application for valve and accessory heat tracing

• Installation Instructions https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/CETHT851T_II.pdf
• SDS https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/CETHT851T_SDS.pdf
• Specification Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/CETHT851T_SS.pdf