127 CALCOAT CEMENT 45#

JM CalCoat-127® Cement, Size: 45 lb, Color: Yellow, Density: 20 pcf, Application: For Finishing Use with Calcium Silicate or Perlite Insulation in High Temperature Piping and Equipment Applications, Special Features: One Coat Finishing, Temperature Rating: 1200 deg F, Container Type: Bag, Form: Solid, Composition: >=30 to <50% Portland Cement, Synthetic Calcium Silicate, >=20 to <30% Continuous Filament Gas Fibers, >=0.1 to <1% Crystalline Silica, Cure Time: 24 hr, Coverage: 30 sq-ft at 1 in

Application   : For Finishing Use with Calcium Silicate or Perlite Insulation in High Temperature Piping and Equipment Applications

Color   : Yellow

Composition   : >=30 to <50% Portland Cement, Synthetic Calcium Silicate, >=20 to <30% Continuous Filament Gas Fibers, >=0.1 to <1% Crystalline Silica

Container Type   : Bag

Coverage   : 30 sq-ft at 1 in

Cure Time   : 24 hr

Density   : 20 pcf

Form   : Solid

Item Name   : Cement

Size   : 45 lb

Special Features   : One Coat Finishing

Sub Brand   : CalCoat-127

Temperature Rating   : 1200 deg F

CalCoat-127 is a proprietary blend of hydraulic cement, calcium silicate and inorganic mineral fibers that provides a smooth finish over high-temperature insulation. It offers protection from corrosion under insulation and no wire mesh is required. It can also be used as a general purpose insulating cement, as it is easy to trowel and resists wetting after initial application. One bag will cover a minimum of 30 sq-ft at 1 in thick. CalCoat-127 can be painted with water or oil based paints.

• Does not cause corrosion to austenitic stainless steel
• Dries to a smooth, paintable surface
• Easy-to-apply, with no mesh required

Standards/Certifications: ASTM C166|ASTM C354|OSHA 29 CFR 1910.134

• Specification Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/CALCOAT-127_SS.pdf