88 FENDOLITE TG 50# - Insulation Accessories

88 FENDOLITE TG 50#

Cement

  • Manufacturer: Isolatek International
  • Brand: Cafco
  • DI Part #: CMNTFNDLTE88TG44I
  • Manufacturer Part #: FENDOLITE TG

Cafco Fendolite® Lightweight Fireproofing Cement, Size: 50 lb, Color: Gray, Density: 40 to 44 pcf, Application: For Industrial Processing/Manufacturing Areas, Mechanical Rooms and Parking Garages, Special Features: Spray Applied, Temperature Rating: 40 deg F, Form: Powder, Odor: Low, Composition: 45 to 65% Portland Cement, 15 to 25% Vermiculite, 10 to 25% Calcium Carbonate, <1% Crystalline Silica, pH Rating: 10 to 13, Melting Point: 981 deg C, Durometer: 40 Shore D

Application   : For Industrial Processing/Manufacturing Areas, Mechanical Rooms and Parking Garages

Color   : Gray

Composition   : 45 to 65% Portland Cement, 15 to 25% Vermiculite, 10 to 25% Calcium Carbonate, <1% Crystalline Silica

Density   : 40 to 44 pcf

Durometer   : 40 Shore D

Form   : Powder

Item Name   : Fireproofing Cement

Melting Point   : 981 deg C

Odor   : Low

Size   : 50 lb

Special Features   : Spray Applied

Sub Brand   : Fendolite

Temperature Rating   : 40 deg F

Type/Style   : Lightweight

pH Rating   : 10 to 13

Isolatek type M-II is the industry's leading high density wet mix spray applied fire resistive material designed to provide fire protection for structural steel and concrete where physical abuse or high traffic may be anticipated. Due to its Portland cement formulation, thermal performance and proven superior durability and ease of application, Isolatek type M-II is the preferred choice worldwide for use in the most challenging commercial and industrial applications.

  • Most widely specified high density SFRM in the industry for over thirty years
  • Lightweight formulation results in reduced dead loads (approximately one third that of concrete)
  • Easiest high density fire protection material to install
  • Superior physical properties when evaluated to all major ASTM test methods to ensure durability
  • Prevents concrete spalling under impact and thermal shock
  • Inorganic material formulation does not promote mold or fungal growth
  • Can be used as a hard topcoat over other Isolatek SFRMs to obtain increased levels of abrasion and impact resistance

Standards/Certifications: ASTM D2240|ASTM E605|ASTM E736

  • pdf SDS https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/CMNTFNDLITEMIIPSI_SDS.pdf
  • pdf Specification Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/CMNTFNDLITEMIIPSI_SS.pdf