Foster Vapor-SafeĀ® 30-80 Series Coating, Size: 2 gal, Color: White, Temperature Rating: -20 to 180 deg F, Container Type: Pail, Form: Liquid, Odor: Ammonia, Composition: 5 to 10% Chlorinated Paraffin, C14-C17, 0.1 to 1% Hindered Amine Light Stabilizer, Tri(nonylphenol)Phosphite, Decanedioic Acid, Methyl 1,2,2,6,6-, Cure Time: 4 hr Touch, Specific Gravity: 1.4, Boiling Point: 212 deg F, VOC: 1.5 %, Viscosity: 60000 to 90000 cPs, Shelf Life: 12 months, Coverage: 100 sq-ft/4 to 6 gal, Application Method: Brush, Airless Spray
Application Method : Brush, Airless Spray
Boiling Point : 212 deg F
Color : White
Composition : 5 to 10% Chlorinated Paraffin, C14-C17, 0.1 to 1% Hindered Amine Light Stabilizer, Tri(nonylphenol)Phosphite, Decanedioic Acid, Methyl 1,2,2,6,6-
Container Type : Pail
Coverage : 100 sq-ft/4 to 6 gal
Cure Time : 4 hr Touch
Form : Liquid
Item Name : Coating
Odor : Ammonia
Series/Model : 30-80
Shelf Life : 12 months
Size : 2 gal
Specific Gravity : 1.4
Sub Brand : Vapor-Safe
Temperature Rating : -20 to 180 deg F
VOC : 1.5 %
Viscosity : 60000 to 90000 cPs
Foster Vapor-Safe coating is a water based, fire resistive, flexible, high solids vapor retarder finish for most types of thermal insulation, including polystyrene foam. It may be used over dry concrete and finishing cement. Vapor-Safe coating has the low water vapor permeance normally found in only solvent based products. It can be used in high humidity environments, and greatly retards water vapor permeation. It is non-flammable in the wet state. Vapor-Safe coating is formulated for both indoor and light-duty, commercial, outdoor use. It is UV resistant. It has a mild, latex paint type odor and is designed for use over insulation on pipes, vessels, ducts and equipment operating at cryogenic upto ambient temperatures.
Standards/Certifications: ASTM E84|California Department of Public Health (CDPH) Standard Method v1.2|DCL Listed|LEED Certified|MAS Green Certified|MIL-PRF-19565C Type II|NFPA 90A|NFPA 90B 25/50|OSHA 29 CFR 1910.134