FOSTER 30-80AF WHITE WB FUNGUS RESISTANT 5 GALLONS - Insulation Accessories

FOSTER 30-80AF WHITE WB FUNGUS RESISTANT 5 GALLONS

Other Mastics

  • Manufacturer: H.B. Fuller
  • Brand: Foster
  • DI Part #: MAST3080AF5F
  • Manufacturer Part #: 15035390

Foster Vapor-Safe® 30-80AF Series Coating, Size: 5 gal, Color: White, Temperature Rating: -20 to 180 deg F, Container Type: Pail, Form: Liquid, Odor: Ammonia, Composition: 1 to 5% Titanium Dioxide, 0.1 to 1% Tri(nonylphenol)Phosphite, Hindered Amine Light Stabilizer, Cure Time: 4 hr Touch, Specific Gravity: 1.4, Boiling Point: 212 deg F, VOC: 1.6 %, Viscosity: 60000 to 90000 cPs, Shelf Life: 12 months, Coverage: 100 sq-ft/4 to 6 gal, Application Method: Brush, Airless Spray

Application Method   : Brush, Airless Spray

Boiling Point   : 212 deg F

Color   : White

Composition   : 1 to 5% Titanium Dioxide, 0.1 to 1% Tri(nonylphenol)Phosphite, Hindered Amine Light Stabilizer

Container Type   : Pail

Coverage   : 100 sq-ft/4 to 6 gal

Cure Time   : 4 hr Touch

Form   : Liquid

Item Name   : Coating

Odor   : Ammonia

Series/Model   : 30-80AF

Shelf Life   : 12 months

Size   : 5 gal

Specific Gravity   : 1.4

Sub Brand   : Vapor-Safe

Temperature Rating   : -20 to 180 deg F

VOC   : 1.6 %

Viscosity   : 60000 to 90000 cPs

Foster Vapor-Safe coating AF is a water based, fire resistive, flexible, high solids, vapor retarder finish for most types of thermal insulation, including polystyrene foam. It may be used over dry concrete and finishing cement. It is designed for use in high humidity areas to resist mold, fungus and mildew growth on its surface and protect the insulation system from their discoloring and deteriorating effects. Vapor-Safe 30-80AF has the water resistance and low water vapor permeance normally only found in solvent based products. It can be used in high humidity environments and greatly retards water vapor permeation. It is non-flammable in the wet state. Vapor-Safe 30-80AF is formulated for both indoor and light-duty, commercial, outdoor use. It is UV resistant. It has a mild, latex paint type odor and is designed for use over insulation on pipes, vessels, ducts and equipment operating below ambient temperatures.

Standards/Certifications: ASTM E84|California Department of Public Health (CDPH) Standard Method v1.2|DCL Listed|LEED Certified|MAS Green Certified|MIL-PRF-19565C Type II|NFPA 90A|NFPA 90B 25/50|OSHA 29 CFR 1910.134

  • pdf SDS https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/MAST3080AF5F_SDS.pdf
  • pdf Specification Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/MAST3080AF5F_SS.pdf