FOSTER 90-61 CRYOLAR 1KVS 5 GALLONS - Insulation Accessories

FOSTER 90-61 CRYOLAR 1KVS 5 GALLONS

Other Mastics

  • Manufacturer: H.B. Fuller
  • Brand: Foster
  • DI Part #: MAST90615F
  • Manufacturer Part #: 15035462

Foster Cryolar™ 90-61 Series Sealant, Size: 5 gal, Color: Gray, Temperature Rating: -320 to 250 deg F, Container Type: Pail, Form: Liquid, Odor: Solvent, Composition: 10 to 30% Trimethylbenzene, 1,2,4-, 1 to 5% Polybutene, Stoddard Solvent, Trimethylbenzene, 1,3,5, Titanium Dioxide, Cumene, Xylene, Diethylbenzene, Propoxyethanol, 2-, 0.1 to 1% Hindered Amine Light Stabilizer, Decanedioic Acid, Methyl 1,2,2,6, 6-Pentamethyl-4-Piperidinyl Ester, Crystalline Silica, Cure Time: 2 to 3 hr Touch, Specific Gravity: 1.12, Flash Point: 46 deg C, Elongation: 150 %, Shelf Life: 12 months, Coverage: 100 sq-ft/3.5 to 4 gal, Application Method: Brush, Trowel

Application Method   : Brush, Trowel

Color   : Gray

Composition   : 10 to 30% Trimethylbenzene, 1,2,4-, 1 to 5% Polybutene, Stoddard Solvent, Trimethylbenzene, 1,3,5, Titanium Dioxide, Cumene, Xylene, Diethylbenzene, Propoxyethanol, 2-, 0.1 to 1% Hindered Amine Light Stabilizer, Decanedioic Acid, Methyl 1,2,2,6, 6-Pentamethyl-4-Piperidinyl Ester, Crystalline Silica

Container Type   : Pail

Coverage   : 100 sq-ft/3.5 to 4 gal

Cure Time   : 2 to 3 hr Touch

Elongation   : 150 %

Flash Point   : 46 deg C

Form   : Liquid

Item Name   : Sealant

Odor   : Solvent

Series/Model   : 90-61

Shelf Life   : 12 months

Size   : 5 gal

Specific Gravity   : 1.12

Sub Brand   : Cryolar

Temperature Rating   : -320 to 250 deg F

Foster Cryolar 1K vapor stop is a ready-to-use, one component, vapor stop sealant for use in cryogenic applications. It is specially formulated with select synthetic rubbers to form an elastomeric, vapor barrier film capable of spanning the temperature ranges found in cryogenic applications including LNG, ethylene and ammonia production. It is suitable for application to PUR and PIR foam, cellular glass and other rigid insulations in conjunction with aluminum, steel and masonry construction materials. Cryolar 1K vapor stop has excellent resistance to moisture and water vapor, forming a vapor tight seal from the cryogenic pipe surface to the ambient outer insulation surface. Cryolar 1K vapor stop is designed for vapor stop applications on insulated cryogenic pipelines and equipment. It can also be used on very low temperature applications to seal seams where a water vapor tight insulation system is required.

  • 1k product no need to mix two components
  • No concern for improper mix ratio
  • Extra mixing equipment or containers are not required
  • No pot life concerns
  • More body results in less dripping
  • Does not sag and run on vertical surfaces
  • May be applied with a brush or a trowel
  • Improved product consistency allows for easier embedding and stability of reinforcing mesh
  • Saves time, saves money

Standards/Certifications: OSHA 29 CFR 1910.134

  • pdf SDS https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/MAST90615F_SDS.pdf
  • pdf Specification Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/MAST90615F_SS.pdf
  • pdf Specification Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/MAST90615F_SS_1.pdf