JM Polyiso Board, Insulation Thickness: 1-1/2 in, Material: Polyisocyanurate, Color: Silver/Opaque, Facing Type: AP Foil, Length: 8 ft, Width: 4 ft, Application: For Interior and Exterior Walls, Ceilings and Crawlspaces, Cold Service Applications, Temperature Rating: -297 to 300 deg F, Water Vapor Permeability: 0.05 perm-in, Water Vapor Sorption: 0.1 %, Flame Spread Index: <=25, Smoke Developed Index: <=450, Compressive Strength: >=16 psi, Flexural Strength: >=40 psi, Thermal Conductivity: 6 Btu-in/hr-sq-ft-deg F
Application : For Interior and Exterior Walls, Ceilings and Crawlspaces, Cold Service Applications
Color : Silver/Opaque
Compressive Strength : >=16 psi
Facing Type : AP Foil
Flame Spread Index : <=25
Flexural Strength : >=40 psi
Insulation Thickness : 1-1/2 in
Item Name : Polyiso Board
Length : 8 ft
Material : Polyisocyanurate
Smoke Developed Index : <=450
Temperature Rating : -297 to 300 deg F
Thermal Conductivity : 6 Btu-in/hr-sq-ft-deg F
Water Vapor Permeability : 0.05 perm-in
Water Vapor Sorption : 0.1 %
Width : 4 ft
Johns Manville AP foil faced polyiso continuous insulation board consists of a uniform closed-cell polyisocyanurate foam core bonded on each side to a foil facer. One side has a reflective foil facer and the other side has a white non-reflective foil facer to suit your building needs. Polyiso provides one of the highest R-values per inch of any rigid insulation (R-6.0 at 1 in). Furthermore, when properly installed, AP foil faced polyiso continuous insulation functions as a water resistive barrier, vapor barrier and air barrier, eliminating the need to install additional components. AP foil faced polyiso continuous insulation is produced with an EPA compliant hydrocarbon based blowing agent that has zero ozone depletion potential (ODP) and virtually no global warming potential (GWP) it also meets both CFC and HCFC free specification requirements. Polyiso is one of North America's most widely used insulation products and has been cited by the EPA for its responsible impact on the environment. AP foil faced polyiso continuous insulation provides exceptional heat, moisture and air control to protect your building's exterior wall assembly.
- AP foil faced polyiso foam sheathing provides continuous insulation for maximum efficiency, as well as exceptional moisture, heat and air control
- It features a reflective foil facer on one side and a nonreflective facer on the other
Standards/Certifications: ASTM C1289 Type 1 Class 1 or 2|ASTM C203|ASTM C209|ASTM C518|ASTM D1621|ASTM E1233|ASTM E2178|ASTM E2357|ASTM E331|ASTM E84|ASTM E96|CAN/ULC S704 Type 1 Class 1|ICC-ES|Canadian Construction Materials Centre 13104-L|cETL Intertek|Energy Star Certified|NFPA 259|NFPA 285|OSHA 29 CFR 1910.1200
Installation Instructions
