DeWALT Power-Stud®+ SD1 Wedge Anchor with Expansion Clip, Diameter: 1/4 in, Material: Carbon Steel, Finish: Zinc Plated, Length: 1-3/4 in, Application: For Structural Connections, Such as Beam and Column Anchorage, Interior Applications/Low Level Corrosion Environment, Seismic and Wind Loading, Safety-Related Attachments, Tension Zone Applications Like Cable Trays and Strut, Pipe Supports, Fire Sprinklers, Thread Size/Type: 1/4 in - 20 TPI UNC x 3/4 in L, Tension Strength: 1660 lb, Shear Strength: 1255 lb, Includes: Nut and Washer, Minimum Embedment Depth: 1-1/8 in, Drill Size: 1/4 in Dia, Hole Clearance: 5/16 in Dia, Hole Depth: 1-1/4 in, Torque: 4 ft-lb, Wrench/Socket Size: 7/16 in
Application : For Structural Connections, Such as Beam and Column Anchorage, Interior Applications/Low Level Corrosion Environment, Seismic and Wind Loading, Safety-Related Attachments, Tension Zone Applications Like Cable Trays and Strut, Pipe Supports, Fire Sprinklers
Diameter : 1/4 in
Drill Size : 1/4 in Dia
Finish : Zinc Plated
Hole Clearance : 5/16 in Dia
Hole Depth : 1-1/4 in
Includes : Nut and Washer
Item Name : Wedge Anchor with Expansion Clip
Length : 1-3/4 in
Material : Carbon Steel
Minimum Embedment Depth : 1-1/8 in
Shear Strength : 1255 lb
Sub Brand : Power-Stud+ SD1
Tension Strength : 1660 lb
Thread Size/Type : 1/4 in - 20 TPI UNC x 3/4 in L
Torque : 4 ft-lb
Wrench/Socket Size : 7/16 in
The Power-Stud+ SD1 anchor is a fully threaded, torque controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, and grouted concrete masonry. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
- Consistent performance in high and low strength concrete
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow up expansion after setting under tensile loading
- Nominal drill bit size is the same as the anchor diameter
- Length ID code and identifying marking stamped on head of each anchor
Standards/Certifications: (ICC-ES) ESR-2818|(ICC-ES) ELC-2818|(ICC-ES) ESR-2966 2015 IBC 2015 IRC 2012 IBC 2012 IRC 2009 IBC 2009 IRC|FM Approved|UL EX1289
Catalog/Catalog Cut Sheet
