FireDam Spray 200 Series Joint Sealant, Application: For Fire Stopping Construction Joints, Perimeter Joints and Through Penetrations, Boiling Point: >=100 deg C, Composition: 15 to 40% Water, 15 to 40% Polymer, 10 to 30% Limestone, 7 to 13% Alumina Trihydrate, 5 to 10% Styrene-Butadiene Polymer, Container Type: Pail, Flash Point: >93 deg C, Form: Liquid, Size: 5 gal, VOC: <1 g/L, pH Rating: 7
Application : For Fire Stopping Construction Joints, Perimeter Joints and Through Penetrations
Boiling Point : >=100 deg C
Composition : 15 to 40% Water, 15 to 40% Polymer, 10 to 30% Limestone, 7 to 13% Alumina Trihydrate, 5 to 10% Styrene-Butadiene Polymer
Container Type : Pail
Flash Point : >93 deg C
Form : Liquid
Item Name : Joint Sealant
Series/Model : Spray 200
Size : 5 gal
VOC : <1 g/L
pH Rating : 7
3M FireDam spray is a water-based material that dries to form a durable, elastomeric firestop coating. This material, when used as part of an assembly, will firestop building joints, perimeter joints (curtain wall), and through penetration seals.
- Upto four hours of fire protection in construction joints and upto two hours of fire protection for through penetration systems
- Highly elastic material maintains performance with upto +/-50% movement capabilities
- Superior adhesion to most construction materials
- Broad range of applications (extensive portfolio of tested and listed construction and perimeter joint systems)
- Improved spraying pattern applied with conventional airless spray equipment
- Paintable
- Robust jobsite formula (freeze-thaw resistant and uniform seal formation in hot or cold drying conditions)
- Improved spraying for lower sag, uniform coating build properties (stays where it's sprayed)
- Improved hiding power to maintain proper coating thickness
- Easy water clean up
SDS
