THERMON T99 HEAT TRANSFER CEMENT 2 GALLON (FORMERLY T63)

THERMON Heat Transfer Cement, Size: 2 gal, Color: Gray, Special Features: High-Temperature, Form: Liquid, Composition: 10 to 30% Sodium Silicate, 0.5 to 1% CI Pigment Black 26, Specific Gravity: 1.68, Boiling Point: 214 to 216 deg F, Vapor Pressure: 156 mm Hg

Boiling Point   : 214 to 216 deg F

Color   : Gray

Composition   : 10 to 30% Sodium Silicate, 0.5 to 1% CI Pigment Black 26

Form   : Liquid

Item Name   : Heat Transfer Cement

Size   : 2 gal

Special Features   : High-Temperature

Specific Gravity   : 1.68

Vapor Pressure   : 156 mm Hg

T-99 is a specialty high-temperature heat transfer compound formulated to provide exceptional thermal stability and superior bonding strength up to 1000 deg C. Unlike other grades of heat transfer compounds, it is also electrically non-conductive. It is supplied ready to use and may be applied by hand troweling to fill TFK channels. T-99 resists thermal and mechanical shock and provides an efficient heat transfer rate with a high bond strength. In order to promote good surface wetting and ensure contact, the surfaces of traced valves, pumps and other equipment must be prepared just as though a paint or primer is to be applied. Oil, grease, dirt, rust, scale, etc., must be removed. The use of solvents and emulsions along with scraping, chipping and wire brushing are common pre-treatment techniques for steel surfaces.

• Thermally stable at continuous temperature exposures upto 1000 deg C
• Electrically non-conductive
• Exceptional bond strength to resist thermal expansion and contraction
• High shock resistance when exposed to extensive thermal cycling

• Installation Instructions https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/CETHT851T_II.pdf
• SDS https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/CETHT992T_SDS.pdf
• Specification Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/CETHT992T_SS.pdf