Matomo image

2-1/2" X 48" X 96" ENERGY SHIELD PRO BOARD

Polyisocyanurate Board

  • Manufacturer: Atlas Roofing Corporation
  • Brand: Atlas
  • DI Part #: PIBDESP2548A
  • Manufacturer Part #: PIBDESP2548A

Atlas EnergyShield® Pro Polyiso Board, Insulation Thickness: 2-1/2 in, Material: Polyisocyanurate, Facing Type: Tri-Laminate Aluminum Foil, Length: 96 in, Width: 48 in, Application: For Exterior or Interior Continuous Insulation in Commercial and Residential Construction, Masonry or Concrete Wall Systems, Including Exterior Masonry Cavities, Temperature Rating: -297 to 300 deg F, Water Vapor Permeability: <0.1 perm-in, Water Vapor Sorption: <1 %, Flame Spread Index: <25, Smoke Developed Index: <450, Compressive Strength: 25 psi

Application   : For Exterior or Interior Continuous Insulation in Commercial and Residential Construction, Masonry or Concrete Wall Systems, Including Exterior Masonry Cavities

Compressive Strength   : 25 psi

Facing Type   : Tri-Laminate Aluminum Foil

Flame Spread Index   : <25

Insulation Thickness   : 2-1/2 in

Item Name   : Polyiso Board

Length   : 96 in

Material   : Polyisocyanurate

Smoke Developed Index   : <450

Sub Brand   : EnergyShield Pro

Temperature Rating   : -297 to 300 deg F

Water Vapor Permeability   : <0.1 perm-in

Water Vapor Sorption   : <1 %

Width   : 48 in

Atlas EnergyShield Pro is composed of a class A closed-cell polyisocyanurate foam core faced with a reflective 12 mil reinforced foil facer on one side and a white 12 mil reinforced acrylic coated aluminum facer on the other. The blowing agent used to produce the polyiso foam core does not contain any CFCs, HCFCs or HFCs. EnergyShield Pro has zero ozone depletion potential and negligible global warming potential. EnergyShield Pro combines high R-value, class A foam core, durable aluminum facers and water resistive barrier attributes in a high performance rigid wall insulation. EnergyShield Pro is designed to be used as exterior continuous insulation (CI) or may be reversed for interior applications in compliance with NFPA 286 for interior walls only or ceilings only where a clean white surface is desirable. Panel sizes are4 by 8or 4 by 9 ft. Panels can be supplied in nominal 16 or 24 in widths for use in masonry cavity wall applications.

Standards/Certifications: ANSI/UL 263 (E119)|ASHRAE 90.1|ASHRAE 189.1|ASTM C1289 Type I Class 1 and Type I Class 2|ASTM E84|California Approved Insulation Registry T1231 2603 IBC|ICC-ES ESR-1375|IGCC|International Energy Conservation Code|International Residential Code Section R316|NFPA 285|UL Listed

  • pdfSDS https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/PIBDESP2048_SDS.pdf
  • pdfSpecification Sheet https://www.distributioninternational.com//ASSETS/DOCUMENTS/ITEMS/EN/PIBDESP2048_SS.pdf